Hotspotoutdoors

I have a Lund Explore 1700 SS and I would like to add a ski pylon to the back of the boat to pull my kids on the kneeboard. I searched and read a lot of mention of the one from Ease.

Have any of you mounted a ski pylon on your boat?
Where did you mount it?
Did you re-enforce it when you did mount it?
Could you post a picture to help me get pointed in the right direction?

Thanks!

I have a 2000 lund 1700 fisherman and made my own ski pole it is 6 feet tall and made from 2 in alum pipe on the bottom there is a coupler with a plug in it that i drilled a hole in and welded a 3/4 in bolt in it the bolt goes in the center seat mount with a tapper adapter and a home made wing nut to hold it in place. than i made two brace poles from the transom up about half way up the pipe fastened with a 1/2 in bolt the brace poles have hime ends on both ends that go in u brackets that i bolted to the transom the pipe is 1/4in wall and the suport braces are1 in pipe 1/4in wall hope this helps i use ours for wakeboarding and tubing

My 1700 Lund Fisherman came with one. Check out the dealers. It screws in back by the back seat, then the support arms attach at both sides in the back corners.